SpamCop Discussion > Installing GraemeL's "S.A.L.T"

Full Version: Installing GraemeL's "S.A.L.T"

SpamCop Discussion > Discussions & Observations > Geek/Tech Things > Software Issues

DavidT

Oct 2 2007, 11:53 AM

This is a continuation from some OT stuff I started here:

http://forum.spamcop.net/forums/index.php?showtopic=8782

So...Graeme, it seems that my primary sticking point is the lack of "Authen::SASL" which I tried installing using cpan like this:

i Authen::SASL

and my box responded like this:

CODE

CPAN: Storable loaded ok
Going to read /root/.cpan/Metadata
  Database was generated on Tue, 02 Oct 2007 05:36:43 GMT
Strange distribution name [Authen::SASL]
Module id = Authen::SASL
    DESCRIPTION  SASL authentication framework
    CPAN_USERID  GBARR (Graham Barr <gbarr[at]pobox.com>)
    CPAN_VERSION 2.10
    CPAN_FILE    G/GB/GBARR/Authen-SASL-2.10.tar.gz
    DSLI_STATUS  RmpO (released,mailing-list,perl,object-oriented)
    INST_FILE    (not installed)

I tried this, because I was having problems during a manual install of the SMTP_auth Perl module. When I ran "perl Makefile.PL" I got this:

CODE

# perl Makefile.PL
Checking if your kit is complete...
Looks good
Warning: prerequisite Authen::SASL 2.03 not found.
Writing Makefile for Net::SMTP_auth

and then when trying to "make test" I got this:

CODE

cp SMTP_auth.pm blib/lib/Net/SMTP_auth.pm
PERL_DL_NONLAZY=1 /usr/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl
1..1
Can't locate Authen/SASL.pm in @INC (@INC contains: blib/lib/5.8.3/i386-linux-thread-multi blib/lib/5.8.3 blib/lib/i386-linux-thread-multi blib/lib/5.8.2 blib/lib/5.8.1 blib/lib/5.8.0 blib/lib blib/arch/5.8.3/i386-linux-thread-multi blib/arch/5.8.3 blib/arch/i386-linux-thread-multi blib/arch/5.8.2 blib/arch/5.8.1 blib/arch/5.8.0 blib/arch /usr/lib/perl5/5.8.3/i386-linux-thread-multi /usr/lib/perl5/5.8.3 /usr/lib/perl5/site_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.2/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.3 /usr/lib/perl5/site_perl/5.8.2 /usr/lib/perl5/site_perl/5.8.1 /usr/lib/perl5/site_perl/5.8.0 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.2/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl/5.8.2 /usr/lib/perl5/vendor_perl/5.8.1 /usr/lib/perl5/vendor_perl/5.8.0 /usr/lib/perl5/vendor_perl .) at blib/lib/Net/SMTP_auth.pm line 27.
BEGIN failed--compilation aborted at blib/lib/Net/SMTP_auth.pm line 27.
Compilation failed in require at test.pl line 11.
BEGIN failed--compilation aborted at test.pl line 11.
not ok 1
make: *** [test_dynamic] Error 2

So...how to proceed?

TIA,
DT

GraemeL

Oct 2 2007, 01:08 PM

QUOTE(DavidT @ Oct 2 2007, 05:53 PM)

So...how to proceed?

My fault. The i command only looks for modules matching your text and doesn't actually try to install them. Run cpan and then try "install Authen::SASL". Once you've done that, there hopefully shouldn't be any more dependencies and the make on NET::SMTP_auth should be able to complete.

DavidT

Oct 2 2007, 07:17 PM

QUOTE(GraemeL @ Oct 2 2007, 11:08 AM)

Run cpan and then try "install Authen::SASL".

Just tried that, but...

CODE

CPAN: Storable loaded ok
Going to read /root/.cpan/Metadata
  Database was generated on Tue, 02 Oct 2007 05:36:43 GMT
Running install for module Authen::SASL
Running make for G/GB/GBARR/Authen-SASL-2.10.tar.gz
CPAN: LWP::UserAgent loaded ok
Fetching with LWP:
  ftp://ftp.perl.org/pub/CPAN/authors/id/G/GB/GBARR/Authen-SASL-2.10.tar.gz
CPAN: Digest::MD5 loaded ok
Fetching with LWP:
  ftp://ftp.perl.org/pub/CPAN/authors/id/G/GB/GBARR/CHECKSUMS
CPAN: Compress::Zlib loaded ok
Checksum for /root/.cpan/sources/authors/id/G/GB/GBARR/Authen-SASL-2.10.tar.gz ok
Scanning cache /root/.cpan/build for sizes
Use of uninitialized value in chdir at /usr/lib/perl5/5.8.3/CPAN.pm line 929.
Use of chdir('') or chdir(undef) as chdir() is deprecated at /usr/lib/perl5/5.8.3/CPAN.pm line 929.
Uncompressed /root/.cpan/sources/authors/id/G/GB/GBARR/Authen-SASL-2.10.tar.gz successfully
Using Tar:/bin/tar xvf /root/.cpan/sources/authors/id/G/GB/GBARR/Authen-SASL-2.10.tar:
Couldn't untar /root/.cpan/sources/authors/id/G/GB/GBARR/Authen-SASL-2.10.tar

it failed. Tried going in, extracting the files and running the installation manually, and it had more problems, including some memory allocation issues....so...I give up for now. Thanks, anyway, Graeme.

DT

This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.